About Ramset | P.A.T. Licensing | Contact Us
 

HOMETechnical DataApplications GuideProductsNews & Promotions Literature
or go to the Advance Search

Gas Tool Fasteners
(Pre-assembled, Sing-Shot)
The fasteners are designed for use in Ramset Single-Shot Gas Tools (R150, T3SS)
THREADED ROD HANGER For suspended ceilings, piping and other items using 1/4" or 3/8" threaded rod. Fastener is pre-assembled to a 16 gage threaded rod hanger. 100 per jar.
 
PART
NUMBER
DESCRIPTION
 R150 T3SS
|
14TRHMP034
1/4" Rod hanger with 3/4" plated pin
|
38TRHMP034
3/8" Rod hanger with 3/4" plated pin
  Shank diameter = .104/.125 Head diameter = .300
       

ONE HOLE STRAP Used to attach conduit or armored cable to concrete.
Fastener pre-assembled to a 16 gage conduit strap.
100 per jar, 3/8" 200 per jar.

 
PART
NUMBER
DESCRIPTION
 R150 T3SS
|
38HSMP034*
3/8" Hole strap with 3/4" plated pin (UL)
|
12HSMP034
1/2" Hole strap with 3/4" plated pin
| 34HSMP034 3/4" Hole strap with 3/4" plated pin
| 10HSMP034 1" Hole strap with 3/4" plated pin
  Shank diameter = .104/.125 Head diameter = .300  
  * 38HSMP034 = 18 gage  

CONDUIT CLAMP Used to attach conduit to concrete.
Pin pre-assembled to an 18 gage conduit strap.
1/2" 50 per jar and 3/4" 25 per jar.
 
PART
NUMBER
DESCRIPTION
 R150 T3SS
|
12CCMP034L
1/2" Conduit clamp with 3/4" plated pin
|
34CCMP034L
3/4" Conduit clamp with 3/4" plated pin
  Shank diameter = .104/.125 Head diameter = .300    
       

CEILING CLIP ASSEMBLY Pre-assembled Ceiling Clip.
Plated 14 gage clip. 100 per jar.
clamp  
PART
NUMBER
DESCRIPTION
 R150 T3SS
|
34CLIP
3/4" wide angle clip w/ 3/4" length pin
 square square
         
  Shank diameter = .104/.125 Head diameter = .300    
       


TIE STRAP HOLDER Used to install temporary lighting and secure low voltage cable to concrete, uses a standard cable tie up to 3/8" in width. Fastener is pre-assembled to a 22 gage tie strap holder. 50 per jar.
 
PART
NUMBER
DESCRIPTION
 R150 T3SS
|
TSHMP034
Tie strap holder with 3/4" plated pin
 
Shank diameter = .104/.125 Head diameter = .300
  
         
       

MECHANICAL PIN
WITH WASHER		 U Used for the attachment of light gage metal to concrete and steel such as HVAC duct strap to concrete. Plated pin pre-assembled to a 1/2" domed washer. 200 per jar, 1" 100 per jar.

MUST USE WITH MAGNETIC WORK CONTACT ELEMENT (M150200)

  
PART
NUMBER
DESCRIPTION
 R150* T3SS*
|
M012
1/2" Plated step pin with domed washer
|
M034
3/4" Plated pin with domed washer
| M034BB 3/4" Premium step pin with domed washer
| M100 1" Plated pin with domed washer
  Shank diameter = .125 Step Pin .104/.118
Head diameter = .300 (M012=.250)		  
  *Will fit R150 & T3SS with optional work contact element P/N M150200  

1/4-20 THREADED
STUD 		Used to attach electrical components to concrete where removability of the component is required. Plated threaded stud. 200 per jar.
 
PART
NUMBER
THREAD
LENGTH
SHANK
LENGTH 		R150 T3SS
|
14STUD
1/2"
5/8"
 
  Shank diameter = .125

TOP HAT PIN Used for general purpose fastening to concrete. Plated pin with top hat.
200 per jar.
 
PART
NUMBER
DESCRIPTION
 R150 T3SS
|
MP034TH
3/4" Plated pin with top hat
 
Shank diameter = .125 Head diameter = .300
         

BRIDLE RING Pre-Assembled 2" Bridle Ring supports low voltage, data com, signal, and control cables 50 per box.
 
PART
NUMBER
DESCRIPTION
 T3SS
|
BR2
2" bridle ring
 
Shank diameter = .125